Company name

Alltype Engineering provides piping, structural steel, skids, tank and vessel workshop fabrication services and multidiscipline site installation works across almost every industry in Australia. Some recent works include multidiscipline construction scopes and projects that include structural, mechanical piping, E&I works, turnkey construction and maintenance services. In partnership with pipeline contractors and civil contractors, Alltype delivers complete turnkey installation works and work with specialist engineering consultants for design and construct / EPC projects where requested by clients.

A specialist in the fabrication and installation of gas pipeline facilities (including MLVs, barred tees, launchers and receivers, filters, metering and pressure reduction skids), compressor stations and compressor package installation, gas processing equipment installation, pump stations and mild steel cement lined (MSCL) works, subsea spools and installation aids. Alltype is a WS1 Water Corporation approved panel member.

Remote and local site construction of gas compressor stations, offtake stations, meter stations and MLVs complement the company's fabrication capabilities to provide end to end single-source solutions to its clients or standalone construction services. Alltype has opened an office in Brisbane to expand offerings into the eastern states.

Alltype Engineering is a subsidiary of WestStar Industrial (ASX:WSI).

Please send all RFQs to tenders@alltypeengineering.com.au

Contact name
Damelsa Belcher
Contact position
Tenders Coordinator
Phone
08 9410 5333
Address
Australia
Areas serviced

GPA Engineering (GPA) is a highly experienced engineering consultancy providing EPCM services to Australia’s oil and gas industry since 1987, with offices in Brisbane, Adelaide, Perth, Darwin and Melbourne. GPA thrives in solving complex engineering problems and providing value to its clients within process, mechanical, civil/structural, electrical, instrumentation, SCADA, controls and risk engineering fields.

The company delivers single disciplinary projects through to large multidisciplinary developments for greenfields or brownfield operations, from conceptual/feasibility stages through to detailed design, construction, commissioning and operations support.

GPA provides services across the full range of oil and gas projects, from wellhead through gathering, processing, reciprocating and turbine compressor stations, AS 2885 transmission pipelines in steel and spoolable composite, gas and fuel storage projects, AS 4645 distribution pipelines and stations, and facilities supplying power stations and industrial plants. The company also provides independent third party design/MDR validation services.

GPA proudly supports the industry and refine its knowledge, through active participation on ME 38, AS 2885 subcommittees, YPF and EPCRC/FFCRC research projects.

Contact name
Tony Williams
Contact position
Director
Phone
07 3551 1300
Address
Australia
Areas serviced

Momentum Engineering is an independent, Australian owned and operated company that is quality assured and provides safe, efficient and fit-for-purpose engineering consulting and project management services to the energy and resource sector.

Momentum has a proven track record in the pipeline industry, with projects across Australia, including pipelines and laterals; offtake, metering, conditioning and delivery facilities; gas compression and liquid pumping stations; gas storage developments; and gas and liquid production, treatment and export plants.

Momentum provides a range of engineering, procurement, construction and management services to the industry, including concept studies and front-end engineering and design, detailed engineering and design, procurement and construction management, and commissioning and close-out support activities.

Momentum is committed to providing practical solutions to its clients without compromising safety and quality. Momentum is a proud supporter of APGA through the sponsorship of events, involvement in the YPF Committee and APGA Research and Standards Committee membership.

Contact name
Chris Clayton
Contact position
Business Development Manager
Phone
08 9321 6566
Address
Australia
Areas serviced

Pipeline Actuation & Control (PAC) provides niche products and services to Australian oil and gas projects with a focus on the supply of valves and valve automation equipment.

With facilities in Perth and Sydney, PAC designs, manufactures and supplies actuated valve packages, wellhead control panels, chemical injection skids and distribution skids, valve shutdown systems and pressure reducing stations.

With a long history on some of Australia’s biggest oil and gas projects, PAC has the expertise to handle manual and automated valve packages ranging in value from $100 to more than $10 million.

PAC’s clients are a combination of Australia’s most reputable oil and gas producers, pipeline operators and energy companies as well as EPC/EPCM contractors.

PAC is proud to be part of APGA and look forward to continuing to support this great Australian industry.

Contact position
Sales Manager
Phone
02 9998 6605
Mobile
0400 311 756
Address
Australia
Areas serviced
Company name

TFG Group offers a comprehensive suite of services that encompass supply, fabrication, installation, and maintenance, providing a seamless and streamlined experience for pipeline owners and operators across the country.
In-Service Repairs
As part of APA Group’s Preferred Supplier network, TFG Group provide a team of specialised and experienced welding professionals for in-service repair work. Providing emergency repair and scheduled maintenance services, the TFG  team have been called across the country to support major outages, leaks and ongoing maintenance requirements to Australia’s largest gas pipelines.
Your one-stop shop for Supply, Fabrication & Installation Services
Supply: Source and supply products for repairs & maintenance.
Fabricate: Fabrication of pig launchers and receivers, as well as sleeves and spools.
Install: Installation of components on site with experienced teams of in-service welding technicians.
Maintain: Maintenance and urgent repair work, Australia-wide.
Why partner with TFG Group?

One stop shop solution from supply to installation and maintenance.
Australia-wide fabrication facilities and installation teams.
Split code design combining ASME Section VIII with AS2885.
Reduce down-time with rapid response mobilisation.
Stringent adherence to industry standards  AS2885, B31.3 & B31.8.
Preferred supplier of the APA Group.

Fabrication
TFG has experienced success in the manufacture and fabrication of the following:

Repair sleeves
Fabrication of Launchers & Receivers
Spools
Centrifuge stands
Manifolds
Pipework
Skid fabrication
Buffer Tanks
Pressure Vessels
Chemical Tanks & Pipe Work
Elution Skids

Quality Deliverables
TFG Group are able to meet stringent oil & gas requirements for quality and traceability.

Material and Consumable Certifications;
NDT Certificates;
Weld Procedures and Procedure Qualification Records;
Welding Traceability Records & Weld Maps;
Welder Qualification Records;
Welding Supervisor and Inspector Qualifications;
Completed ITP’s

In conjunction with our industry partners, TFG are also able to offer: flow stoppers, pipeline isolations, inline inspection, intelligent pigging, hydrostatic testing, chemical cleaning, heat shrink sleeves, tank inspection and NATA registered test services.

Contact name
Norm MacKinnon
Contact position
Operations Manager - Eastern
Phone
1300 834 888
Mobile
0409 959 307
Address
Australia
Company name

Wasco provides full EPC delivery of upstream projects using its in-house resources and partner specialist services. Its team includes specialist discipline engineering, RPEQ, project management, procurement and fabrication personnel as well as experienced and reliable field personnel to take projects from concept to commissioning.

It offers:

well site equipment
gas and water gathering systems
field power distribution systems
gas compression, dehydration, metering facilities
cross country pipeline systems
hydrogen production, compression, storage, transport and dispensing systems
mine site surface facilities

Wasco is an OEM partner to manufacturers of Australia's prevalent upstream oil and gas rotating equipment providing maintenance planning, advice, skilled personnel, training, OEM parts and reconditioning services for owners of reciprocating or rotary screw, gas engine or motor driven, gas compression equipment, including:

stationary gas engine parts and service
reciprocating gas compression parts and service
rotary screw gas compression parts and service training and –- advice for partner OEM
fleet maintenance planning and execution.

Contact name
Andrew Freeman
Contact position
Business Development Manager
Phone
(07) 3255 6550
Mobile
0429 993 168
Address
Australia

Western Process Controls (WPC) is an Australian-owned and operated company and was originally incorporated in 1987 as an exclusive Fisher Controls Representative. Today, WPC represents many high quality international manufacturers of industrial process control equipment and services to provide its valued customers with valve solutions for any application.

Areas of expertise:

Control Valves
On/Off Valves
ESD/SIS Valves
Severe Service Valves
Pressure Safety Valves
Regulators
Field Instrumentation
Actuation Pneumatic/ Hydraulic/ Electric
Automation Accessories

Contact name
Ms Chieko Suzuki
Contact position
Business Manager
Phone
+618 9455 3599
Mobile
0488 959 599
Address
Australia
Company name

Worley has delivered many of Australia’s pipelines, gathering systems and facilities over the last 40 years with a reputation of delivering quality projects on time and on budget.

As one of the world's largest engineering and project delivery providers and the only one with a dedicated pipeline capability, Worley focuses on developing and maintaining skilled people and efficient digital delivery processes to ensure consistent quality on every project.

It has specialists in all aspects of pipeline and pipeline facilities design, construction, commissioning, operations, maintenance, integrity management, cathodic protection and decommissioning including capability in environment, regulatory approvals, geotechnical and community relations.

Worley is at the forefront of the digital revolution offering full automation of pipeline and gathering design, construction management and integrity management using the GIS-based OmniSight™ platform reducing cost and schedule. Further customer savings are achieved through extensive use of our Global Integrated Delivery centre in India.

Worley has operations and maintenance responsibilities on two major pipelines in Australia and multiple power assets. Worley works with OneBridge to use machine learning to reduce the cost of dig-ups.

Contact name
Peter Cox
Contact position
Vice President & Global Subsector Lead, Upstream Onshore & Midstream
Phone
07 3239 7400
Mobile
0402 007 539
Address
Australia
Areas serviced

If you have any issues completing this form, please contact Managing Editor Molly Hancock at molly.hancock@primecreative.com.au