Alltype Engineering provides piping, structural steel, skids, tank and vessel workshop fabrication services and multidiscipline site installation works across almost every industry in Australia. Some recent works include multidiscipline construction scopes and projects that include structural, mechanical piping, E&I works, turnkey construction and maintenance services. In partnership with pipeline contractors and civil contractors, Alltype delivers complete turnkey installation works and work with specialist engineering consultants for design and construct / EPC projects where requested by clients.
A specialist in the fabrication and installation of gas pipeline facilities (including MLVs, barred tees, launchers and receivers, filters, metering and pressure reduction skids), compressor stations and compressor package installation, gas processing equipment installation, pump stations and mild steel cement lined (MSCL) works, subsea spools and installation aids. Alltype is a WS1 Water Corporation approved panel member.
Remote and local site construction of gas compressor stations, offtake stations, meter stations and MLVs complement the company's fabrication capabilities to provide end to end single-source solutions to its clients or standalone construction services. Alltype has opened an office in Brisbane to expand offerings into the eastern states.
Alltype Engineering is a subsidiary of WestStar Industrial (ASX:WSI).
Please send all RFQs to tenders@alltypeengineering.com.au
APA Group (APA) is a leading Australian energy infrastructure business. It owns or operates approximately $22 billion of energy assets, including more than 15,000 km of gas transmission pipelines spanning mainland Australia, delivering approximately half the nation’s natural gas usage.
APA also owns and operates gas storage facilities, gas fired power stations, gas processing facilities and renewable energy power generation (wind and solar farms). APA has investments in other energy infrastructure, including Energy Infrastructure Investments, EII2, and GDI (EII), which owns the Allgas Gas Network.
The company provides commercial, accounting, corporate, operations and maintenance services to most of these entities. APA also has long-term agreements to operate the gas distribution assets of Allgas and Australian Gas Networks. It has direct management and operational control over the majority of its assets and investments, and employs more than 1,900 people across Australia.
Arrow Energy is an integrated CSG company. It explores and develops gas fields, produces and sells CSG and generates electricity. The company has been safely and sustainably developing CSG since 2000 and supplying it commercially since 2004. With five CSG fields in the Bowen and Surat basins in central and southern Queensland respectively, Arrow delivers almost 20 per cent of Queensland’s gas supply. The company is working to meet domestic and international demand for cleaner burning fuels through gas supply. Arrow is owned by a 50-50 joint venture between Shell and PetroChina.
AtlasGas is an Australian joint venture partner with Honeywell (formerly the German RMG Group). The company was appointed as the Australian and New Zealand agent for the Gorter Controls brand in 2010.
AtlasGas supplies major utility and engineering companies, as well as wholesalers and distributors with a wide range of commercial and industrial gas pressure regulating equipment, including flame arresters/vents, gas meters, volume correctors and gas chromatographs. This is complemented by the company’s full range of regulating and metering stations.
AtlasGas is the ideal partner from the initial design stages through to turnkey solutions and onsite product commissioning and it is compliant with relevant Australian and international safety standards.
The integrated RMG, Bryan Donkin and Gorter brands have a reputation as world leaders in the design, manufacture and marketing of gas control and measurement equipment and systems. AtlasGas is also the representative agent for Uni-Geräte GmbH in Australia and New Zealand, providing AGA approved automatic shut-off valves to suit major combustion applications.
CNC Project Management (CNC) has a long-established history in Australia’s pipeline industry, working on some of Australia’s largest oil, gas and water pipelines.
CNC offers a unique range of consultancy services under the one roof, working across all stages of the project lifecycle – from project inception and planning, through approvals, design and construction, to commissioning, operations and decommissioning.
CNC’s experienced team provides expert advice to progress its clients' projects. CNC sees the big picture for its clients' projects while taking care of the essential detail.
CNC delivers solutions in:
- Project planning and management.
- Alignment selection.
- Landholder access and land acquisition.
- Stakeholder and community engagement.
- Communications planning and management.
- Media and government relations.
- Permitting and approvals, including secondary approvals.
- Environmental management and compliance.
- Field environmental services during construction.
- Native title and cultural heritage management.
- Spatial and data services, including geographic information systems (GIS).
- Agreement management and payment services.
- Pipeline engineering, including SMS studies and facilitation.
Esso Australia is an Australian affiliate of ExxonMobil. Esso operates a number of oil and gas platforms in Bass Strait, southeast of Melbourne, Australia, as well as processing facilities at Longford and Long Island Point in Hastings.
Since the mid-90s, Fyfe has been closely associated through various services with the expansion of the oil and gas sector in the major basins of Australia.
Fyfe is passionately Australian. It is absolutely committed to employing the best people to deliver high-value Australian projects that build Australian prosperity.
Our 350+ staff are based in 15 offices across major capital cities and regional centres, where we provide employment opportunities, encourage a diverse workforce and supports community initiatives. The company's success has come about due to an unswerving commitment to delivering value through integration. As it approaches its fifth decade, Fyfe acknowledges the vital importance of the lasting partnerships it has developed with its clients. It is these powerful personal and professional relationships, built on a foundation of trust, that assures its sustainability and contributes to its clients' success.
Fyfe knows trust is earned, not given. It never takes that for granted.
Global Engineering & Construction is a leading provider of pipelines and facilities construction in the oil, gas and energy sectors.
We specialise in remote and challenging projects, delivering every aspect of a project – from design and fabrication, installation, and commissioning through to ongoing maintenance and repair.
Supported by our in-house hydrotesting and ILI crews, we tackle projects from small dig-ups and repairs, well head connections and flow lines, facilities installation, and commissioning, all the way to main line connections, lateral pipelines and end of line facilities.
100 per cent Australian owned with offices in Brisbane and Kingaroy, we are able to deliver your projects across Australia, supported from our bases in the Cooper Basin and Surat Basin regions.
GPA Engineering (GPA) is a highly experienced engineering consultancy providing EPCM services to Australia’s oil and gas industry since 1987, with offices in Brisbane, Adelaide, Perth, Darwin and Melbourne. GPA thrives in solving complex engineering problems and providing value to its clients within process, mechanical, civil/structural, electrical, instrumentation, SCADA, controls and risk engineering fields.
The company delivers single disciplinary projects through to large multidisciplinary developments for greenfields or brownfield operations, from conceptual/feasibility stages through to detailed design, construction, commissioning and operations support.
GPA provides services across the full range of oil and gas projects, from wellhead through gathering, processing, reciprocating and turbine compressor stations, AS 2885 transmission pipelines in steel and spoolable composite, gas and fuel storage projects, AS 4645 distribution pipelines and stations, and facilities supplying power stations and industrial plants. The company also provides independent third party design/MDR validation services.
GPA proudly supports the industry and refine its knowledge, through active participation on ME 38, AS 2885 subcommittees, YPF and EPCRC/FFCRC research projects.
Jemena is a unique Australian energy infrastructure business that owns and operates more than $11 billion worth of energy assets and specialises in both transmission and distribution of gas and electricity.
Its wholly-owned gas assets include the Jemena Gas Network, the Queensland Gas Pipeline, the Eastern Gas Pipeline, the Northern Gas Pipeline, Darling Downs Pipeline, the VicHub, Atlas and Roma North Processing facilities, and the Colongra Gas storage and transmission facility. Millions of Australians rely on the company to deliver their gas and electricity.
Jemena is backed by the vast strength and resources of its owners State Grid Corporation of China and Singapore Power International.
Momentum Engineering is an independent, Australian owned and operated company that is quality assured and provides safe, efficient and fit-for-purpose engineering consulting and project management services to the energy and resource sector.
Momentum has a proven track record in the pipeline industry, with projects across Australia, including pipelines and laterals; offtake, metering, conditioning and delivery facilities; gas compression and liquid pumping stations; gas storage developments; and gas and liquid production, treatment and export plants.
Momentum provides a range of engineering, procurement, construction and management services to the industry, including concept studies and front-end engineering and design, detailed engineering and design, procurement and construction management, and commissioning and close-out support activities.
Momentum is committed to providing practical solutions to its clients without compromising safety and quality. Momentum is a proud supporter of APGA through the sponsorship of events, involvement in the YPF Committee and APGA Research and Standards Committee membership.
Origin Energy is involved in oil and gas exploration, development and production, as well as gathering systems and licensed pipelines.
Powered is a business development firm that leverages its massive network of industry contacts to sell its clients products and services into the Australian energy industry. Whether its client is an aspiring local start-up or a global market leader, Powered was founded in 2013 to help great companies reach new levels of sales performance in the Australian oil and gas, resources, and mining sectors. The company's proven track record shows it's acted as a conduit for North American companies to crack into the Australian market and as an advocate for Aussie service and product providers to build their order books nationally. Powered knows a lot of people and it knows the lay of the land.
Sustech Engineering is a multidisciplinary engineering consultancy (ISO 9001:2015 certified) providing engineering and project management services since 2013 to WA’s key oil and gas, hydrogen, chemical, fertiliser, ammonia, pipelines, water, CCS, mining-mineral processing and port with an emphasis on safety and sustainability.
The company partners at any stage of small to medium greenfield, brownfield and shutdown engineering projects and take up roles of owner’s/lender’s engineer or feasibility concept-FEED-detail design engineer. We do regulatory compliance, readiness for operation, operation-maintenance, asset integrity and troubleshooting, technical due-diligence, 3rd party design & MDR review-validation as well as litigation support and pilot plants.
We also provide niche services like pipe stress analysis, pipelines, vessel, tank, FEA, FRP-piping, inspection, various studies and FFS, structural analysis, process safety, electrical system analysis. We think out of the box and provide cutting-edge solutions and in-depth analytics to process and projects.
Driven by a passion for forensic engineering, the company creates long-lasting value through experienced professional service and efficient risk management. Our ethos is what sets it apart and keeps it ahead of the competition: We put our clients first.
Universal Corrosion Coatings (UCC) provides solutions to corrosion and material degradation issues across the oil and gas, water, energy, marine, mineral processing and civil infrastructure sectors. UCC specialises in offering unique and customised solutions to corrosion and material degradation problems associated with infrastructure assets.
WestSide Corporation is a CSG producer with certified reserves and a diversified portfolio of exploration assets in Queensland.
WestSide operates the Meridian SeamGas CSG fields near Moura, 160 km west of Gladstone in Queensland’s Bowen Basin in a joint venture (JV) with Mitsui E&P Australia.
The company holds a 51 per cent interest in the Meridian JV, with Mitsui E&P Australia holding the remaining 49 per cent.
WestSide also holds 25.5 per cent JV interests with QGC and Mitsui E&P Australia in other CSG projects, with exploration and appraisal programs currently underway at the Paranui, Tilbrook and Mount Saint Martin pilots in the Bowen Basin, Queensland.
Woodside Energy (Woodside) is an independent Australian oil and gas company playing a key role in supplying energy to the region.
Woodside's producing LNG assets in the northwest of Australia are among the world's best facilities. Since 1984, Woodside has been operating the landmark Australian project, the North West Shelf, which remains one of the world's premier LNG facilities. In 2012, Woodside added the Pluto LNG Plant to its onshore operating facilities.
The company operates floating oil production, storage and offloading vessels in Australia, and has an excellent track record of efficiently and safely producing from current fields. It also maintains a portfolio of non-LNG projects. Woodside produces natural gas, LPG, condensate and oil for customers in Australia and elsewhere.
If you have any issues completing this form, please contact Managing Editor Molly Hancock at molly.hancock@primecreative.com.au