Company name

Alltype Engineering provides piping, structural steel, skids, tank and vessel workshop fabrication services and multidiscipline site installation works across almost every industry in Australia. Some recent works include multidiscipline construction scopes and projects that include structural, mechanical piping, E&I works, turnkey construction and maintenance services. In partnership with pipeline contractors and civil contractors, Alltype delivers complete turnkey installation works and work with specialist engineering consultants for design and construct / EPC projects where requested by clients.

A specialist in the fabrication and installation of gas pipeline facilities (including MLVs, barred tees, launchers and receivers, filters, metering and pressure reduction skids), compressor stations and compressor package installation, gas processing equipment installation, pump stations and mild steel cement lined (MSCL) works, subsea spools and installation aids. Alltype is a WS1 Water Corporation approved panel member.

Remote and local site construction of gas compressor stations, offtake stations, meter stations and MLVs complement the company's fabrication capabilities to provide end to end single-source solutions to its clients or standalone construction services. Alltype has opened an office in Brisbane to expand offerings into the eastern states.

Alltype Engineering is a subsidiary of WestStar Industrial (ASX:WSI).

Please send all RFQs to tenders@alltypeengineering.com.au

Contact name
Damelsa Belcher
Contact position
Tenders Coordinator
Phone
08 9410 5333
Address
Australia
Areas serviced

Atlas Copco Rental is a market-leading provider of temporary air, nitrogen and steam solutions for industrial applications. For short or long-term demands, planned maintenance, business continuity or unexpected emergencies the company provides agile and cost-efficient solutions. Atlas Copco is not simply an equipment rental company but a provider of total solutions, delivering support from the beginning to end of your project. The company's comprehensive fleet of state-of-the-art equipment is tailored to match the needs of local industries. Safety is paramount, accessories are part of the total package and equipment is supplied to
comply with local regulations. Areas serviced include: Australia, New Zealand and Papua New Guinea.

Contact name
Scott Robinson
Contact position
Business Development Manager – Oceania
Mobile
0438 235 702
Address
Australia
Areas serviced
Company name

Atteris, established in 1999 and with offices in Perth Western Australia, and Houston Texas, is a privately owned and independent engineering and design consultancy for subsea, pipelines and sustainable energy systems.

The company is ISO 9001:2015 certified and uses continuous improvement processes to ensure the highest quality services for its clients. Its services cover all lifecycle phases of developments including concept definition, engineering and design, construction support, operations support and decommissioning.

Contact name
Thomas Seeber
Contact position
Principal Engineer
Phone
08 9322 7922
Mobile
0423 390 819
Address
Australia
Areas serviced

The mission of Australasian Corrosion Consultants (ACC) is to maximise the service life of essential infrastructure by using the application of innovative corrosion design, enabling businesses to increase the life of their assets and reduce expenditure on maintenance.

The company’s services include:

Corrosion investigation and consulting
Asset integrity services
Cathodic protection design
Surveys and investigations
Installation and maintenance

Contact name
Reece Baines
Contact position
Business Manager, Sales & Operations
Phone
0433 325 171
Address
Australia
Company name

AVMIN specialises in providing complete end to end transportation and charter aircraft solutions for the mobilization of FIFO workforces. We are Australia's leader in charter aircraft solutions, AVMIN offers the only charter concierge service. With a worldwide database of partner operators, AVMIN can land you or your passengers at any airport in world.
We are owned by one of the largest travel agency groups in the world, the Flight Centre Travel Group. The aircraft we can provide range from supplying turbo props to commercial sized airliners, helicopters, emergency flights, freight movements and private corporate jets. AVMIN currently provides a range of services to the oil and gas industry ranging from pipeline survey to FIFO to emergency freight and medevac.
AVMIN operates with a safety-first philosophy, aligning to broader mining industry safety standards and practices. AVMIN was the first non-aircraft operator to be audited and approved by Flight Safety Australia and Achilles under the International Oil and Gas Producers (OGP) Aviation Safety Standards as an aviation logistics service provider.

Contact name
Amrit Wijesuriya
Contact position
General Manager
Phone
0403 506 108
Mobile
0403 506 108
Address
Australia
Areas serviced
Company name

Baker Hughes is an energy technology company that provides solutions for energy and industrial customers worldwide. Built on a century of experience and with operations in more than 120 countries, its innovative technologies and services are taking energy forward – making it safer, cleaner and more efficient for people and the planet.

We help operators confidently manage their assets, partnering to deliver data, technology, solutions and expertise for smarter ways of working. The mutual goal: safe operations, asset integrity and enhanced profitability. The company can help manage the lifecycle of your asset by delivering timely and stress-free start-up, supporting day to day reliability and controlled decommissioning.

Baker Hughes' combination of powerful engineering capabilities and experience with a strong service footprint brings peace of mind to even the most complex challenges. Its unique portfolio includes pipeline inspection and integrity services, pipeline and process pre-commissioning and maintenance services.

Contact name
Bianca Frzop
Contact position
Sales Manager
Mobile
61 429 939 806
Address
Australia
Areas serviced

CNC Project Management (CNC) has a long-established history in Australia’s pipeline industry, working on some of Australia’s largest oil, gas and water pipelines.

CNC offers a unique range of consultancy services under the one roof, working across all stages of the project lifecycle – from project inception and planning, through approvals, design and construction, to commissioning, operations and decommissioning.
CNC’s experienced team provides expert advice to progress its clients' projects. CNC sees the big picture for its clients' projects while taking care of the essential detail.

CNC delivers solutions in:
- Project planning and management.
- Alignment selection.
- Landholder access and land acquisition.
- Stakeholder and community engagement.
- Communications planning and management.
- Media and government relations.
- Permitting and approvals, including secondary approvals.
- Environmental management and compliance.
- Field environmental services during construction.
- Native title and cultural heritage management.
- Spatial and data services, including geographic information systems (GIS).
- Agreement management and payment services.
- Pipeline engineering, including SMS studies and facilitation.

Contact name
Scott Pearce
Contact position
Chief Executive Officer
Phone
1300 123 262
Address
Australia
Areas serviced
Company name

Core Group is an integrated, engineering, project management and field services company that specialises in providing pipeline integrity and easement management solutions to the oil and gas industries.

Contact name
Peter Bielawski
Contact position
Technical Operations Manager
Phone
+64 6 769 9391
Mobile
+21 264 1476
Address
New Zealand
Areas serviced

Corrosion Control Engineering (CCE) is Australasia's leading pipeline corrosion prevention service provider. Formed in 2001, CCE has eight offices covering Australia, New Zealand and the Pacific Islands. This includes offices in Sydney, Melbourne, Brisbane, Perth, Adelaide and Townsville in Australia and in Auckland and New Plymouth in New Zealand.

Services include cathodic protection (CP) design, supply, installation, commissioning, investigation and maintenance on a variety of onshore and offshore pipeline systems. CCE is also Australasia's premier supplier of CP materials and pipeline equipment with fully stocked warehouses across the region, each staffed with product and materials specialists. CCE also offers pipeline integrity and coatings consultancy services.

Contact name
Ben Dahl
Contact position
Group Products & Materials Sales Manager
Mobile
+61 448 934 883
Address
Australia
Areas serviced
Company name

Directhitt is an Australian trenchless specialist for oil and gas, mining, power, telecommunications, water and wastewater projects which require trenchless pipeline or conduit installations in onshore or shore crossing environments. Based on 27 years of contracting experience throughout Australia and Asia, the company offers complete HDD design and engineering solutions for clients, from concept to construction, through the application of its specialised knowledge and experience, including:

Design and engineering
River Crossings
Shore crossings
Hard rock difficult geotechnical conditions
Microtunnelling

Directhitt is experienced with diameters of 100 to 1,200 mm, across distances of up to 2,100 m. The company can provide clients advice on project methodology, such as the use of HDD intersects for long crossings or where geotechnical conditions require careful management of drilling pressures and drilling fluids for environmentally sensitive locations.

The contactor can also provide clients advice on geotechnical investigations required to minimise project risk and deliver a successful project, avoiding potential contractor construction claims.

Contact name
Dimce Sijakovski
Contact position
Business Development Manager
Phone
(07) 3804 0200
Address
Australia

At Downer, customers are at the heart of everything the company does. Its purpose is to create and sustain the modern environment by building trusted relationships with its customers and Downer promises to work closely with customers to help them succeed, using world leading insights and solutions.

Downer designs, builds and sustains assets, infrastructure and facilities and is the leading provider of integrated services in Australia and New Zealand. With a history dating back over 150 years, Downer is listed on the Australian Securities Exchange and New Zealand Stock Exchange as Downer EDI Limited (DOW). Downer is an ASX 100 company that also owns 88 per cent of Spotless Group Holdings Limited (SPO).

Expertise

Downer supports its customers through the full life of their assets - from initial feasibility and design through to production and operations and eventual decommissioning. It builds strong relationships of trust with customers, truly understanding and predicting their needs and bringing them world leading insights and solutions. Downer aims to employ the best people and bring thought leadership to each stage of the asset lifecycle as it supports customers to plan, create and sustain.

Asset Services

Downer is a leading provider of asset maintenance and specialist services to the oil and gas, power generation and industrial sectors in Australia. It supports customers with long-term, relationship-based contracts where the company seeks to optimise the reliability, efficiency and whole-of-life costs of their assets. Downer's key capabilities cover the full range of services including maintenance, shutdown, turnaround and outage delivery, sustaining capital program delivery, project and commissioning services.

The company partners with customers to deliver success, driving continuous improvement through collaboration and innovation. Downer brings together a depth of technical expertise, industry partnerships and lean processes to maximise value for its customers and their businesses.

Contact name
Troy Parry
Contact position
Contract Manager
Phone
07 3564 5000
Areas serviced
Company name

ERIAS specialises in environmental and social impact assessment and management, delivering permitting and life-of-project environmental and social management services to pipeline, petroleum and energy projects.

Its career experience includes assignments in more than 40 countries, bringing global industry experience to its projects, whether it be for owners/operators, lenders, constructors or regulators.

ERIAS also specialises in construction environmental and social management services, including the provision of onsite planning, advisory, auditing and monitoring personnel embedded into owner and constructor teams.

ERIAS undertakes assignments across Australia and throughout Asia and Papua New Guinea. Its clients include APA, Beach Energy, ExxonMobil, GB Energy, Oil Search, Santos, Shell and TOTAL.

ERIAS service lines include: permitting and approvals, environmental and social impact assessment, stakeholder engagement and social performance management, environmental management and monitoring, marine and freshwater studies, construction environmental and social management and auditing.
ERIAS has offices in Adelaide, Brisbane, Melbourne and Port Moresby.

Contact name
Andrew Pym
Contact position
Director
Mobile
0417 564 702
Address
Australia

Esso Australia is an Australian affiliate of ExxonMobil. Esso operates a number of oil and gas platforms in Bass Strait, southeast of Melbourne, Australia, as well as processing facilities at Longford and Long Island Point in Hastings.

Contact name
David Levy
Contact position
Pipeline Integrity Engineer
Phone
03 9261 0963
Address
Australia
Areas serviced
Company name

Fast Fusion manufactures and sells equipment which leverages patented technologies for pipe loading and portable weld cooling of polyethylene (PE) pipe fusions. Fast Fusion's innovations bring improved personnel safety, protection from environment allowing continuation of work in harsh conditions, weld reliability improvements and increased production per hour resulting in significantly lower costs per fusion weld.

Contact name
Patrick Nickles
Contact position
Owner/General Manager
Phone
+1 605 596 6135
Address
US
Areas serviced
Company name

GHD's oil and gas and future fuels group has provided multidisciplinary, high value dedicated services to the pipeline industry for more than 25 years. These services include regulatory approvals, environmental and stakeholder services, engineering and advisory services.

Services include: brownfield/greenfield facilities engineering; project feasibility studies and concept development; onshore pipeline engineering; risk and safety; hazardous area management; functional safety; EPCM services; materials technology; operational support; asset management; and approvals.

In addition, GHD has more than 10,000 personnel ready to provide engineering, environmental, planning, project management and architecture services for infrastructure associated with developing and operating oil and gas assets.

Contact name
John Eijbergen
Contact position
Senior Project Engineer
Phone
07 3316 3803
Address
Australia
Areas serviced

GPA Engineering (GPA) is a highly experienced engineering consultancy providing EPCM services to Australia’s oil and gas industry since 1987, with offices in Brisbane, Adelaide, Perth, Darwin and Melbourne. GPA thrives in solving complex engineering problems and providing value to its clients within process, mechanical, civil/structural, electrical, instrumentation, SCADA, controls and risk engineering fields.

The company delivers single disciplinary projects through to large multidisciplinary developments for greenfields or brownfield operations, from conceptual/feasibility stages through to detailed design, construction, commissioning and operations support.

GPA provides services across the full range of oil and gas projects, from wellhead through gathering, processing, reciprocating and turbine compressor stations, AS 2885 transmission pipelines in steel and spoolable composite, gas and fuel storage projects, AS 4645 distribution pipelines and stations, and facilities supplying power stations and industrial plants. The company also provides independent third party design/MDR validation services.

GPA proudly supports the industry and refine its knowledge, through active participation on ME 38, AS 2885 subcommittees, YPF and EPCRC/FFCRC research projects.

Contact name
Tony Williams
Contact position
Director
Phone
07 3551 1300
Address
Australia
Areas serviced
Company name

Herrenknecht AG, based Germany, was established in 1977 and is a leading manufacturer of tunnelling equipment. Through innovation and development, Herrenknecht has expanded its equipment range with specialised pipeline installation technologies.

Herrenknecht's horizontal directional drilling (HDD) rigs offer pull forces from 80 to 600 t, a range of HDD tooling including full face hole openers (FFHO) for single-pass large diameter reaming stages, weeper subs and downhole jet pumps.

It offers Direct Pipe® technology, using AVN machine and Pipe Thruster, for single-pass installation of steel pipelines from 20 to 60 inches (508 to 1,524 mm) in difficult ground conditions, sensitive areas, or shore approaches.

Herrenknecht's Pipe Thruster's offer 300 to 750 t push/pull force to assist challenging HDD installations of longer pipelines and larger diameters, or as a pipeline rescue or insertion tool.

Its Pipe Express® method works as a rapid, semi-trenchless, cross country pipeline installation system for 30 to 60 inches(762 to 1,524 mm).

Herrenknecht's E-Power Pipe® technology, using a microtunnel boring machine with jet pump (AVNS) for longer drives in small diameters. First, the AVNS excavates borehole using temporary jacking pipe concept. Second, the rack and pinion jacking frame pulls the prefabricated product pipe.

Contact name
Ben Hayes
Contact position
Sales Manager Australia
Phone
+66 3368 2411
Mobile
+66 8 9814 0117
Address
Germany
Areas serviced

iPipe Services is a leading independent provider of specialist pipeline services to the oil, gas, mining and utility industries, wholly owned by Monadelphous Engineering. The company provides a comprehensive range of services including maintenance, construction, and process and pipeline services across steel transmission pipelines, compression facilities and gathering networks for the upstream CSG industry.

Being at the forefront of new technologies, iPipe Services' investment into research and development as well as continuous improvement with innovative solutions, allows the company to deliver safe and more efficient results for its clients.

iPipe Services' commitment to its clients is to provide the highest quality independent specialist pipeline services available in the marketplace. The company delivers on this commitment through honesty in communication, dedication to quality, safety, sustainable work practices and innovation.

The company's skilled workforce is focused on its clients’ specific needs. iPipe Services does this by working closely with its clients, suppliers and stakeholders to provide turn-key, efficient and cost-effective solutions for project delivery.

Contact name
Jamie Gabb
Contact position
Business Development & Growth Advisor
Phone
07 3368 6700
Mobile
0438 761 728
Address
Australia
Areas serviced

Lochard Energy is an Australian midstream energy infrastructure business owned and backed by institutional infrastructure investors. The company was formed in 2015 and operates the largest independent gas storage facility in Australia, providing processing, storage and energy security services to the major commercial operators within the domestic energy market.

Its energy storage facility has been in operation since 1999, holding a strategic position in the Australian gas market, and as a company it specialises in building, operating and maintaining major hazard facilities with consistent profitability and excellent health, safety and environmental records.

Committed to operational excellence, customer-focused outcomes and strong safety culture, Lochard Energy is a solid business partner and dependable member of the community.

Contact name
Becky Nguyen
Contact position
General Manager Commercial
Phone
03 8646 0509
Address
Australia
Areas serviced
Company name

Maxibor is Australia’s leading provider of horizontal directional drilling (HDD) design and installation services across the gas, rail, water, sewer, road, power, mining, renewables and telecommunications sectors. It has the largest fleet of HDD machinery in Australia with 10 HDD rigs, including two maxi-rigs capable of long-distance (1.5 km) bores at a diameter of up to 1,200 mm. Maxibor has multiple crews that are very experienced in all ground conditions including hard rock and water-charged sand.

Its professional trenchless technology design and engineering services encompass bore alignment plans and profiles, drilling fluid fracture gradient analysis, mechanical analysis of drilling operations and RPEQ certification of the HDD bore design and product pipe installed loads.

The company's crews and equipment can be easily mobilised to anywhere in Australia from its bases in New South Wales and Queensland. David Turner and the senior team are readily available to discuss how Maxibor can collaborate with clients to optimise outcomes on their gas pipeline installation projects.

Contact name
David Turner
Contact position
National Business Development Manager
Phone
(02) 4937 5500
Mobile
0499 375 511
Address
Australia
Areas serviced

McConnell Dowell is a leading international pipeline contractor. It has constructed more than 30,000 km of new pipe networks across more than 200 projects including gas, petroleum, water and slurry pipelines. These pipelines help drive economic and social progress across Australia, New Zealand and Asia.

McConnell Dowell is the partner of choice for complex EPC and construction projects. The company is an expert in large diameter pipeline construction and has delivered gas pipelines up to 1,300 mm in diameter and water pipelines up to 1,800 mm in diameter. Its in-house specialist skills and plant enable execution of Direct Pipe method, horizontal directional drilling, microtunnelling, marine pipe pulls, pipe bridges and other complex crossing solutions.

McConnell Dowell's sustained success in the pipeline industry is based on strong client collaboration and effective community consultation and environmental management.

Contact name
Leon Richards
Contact position
Group Technical Director – Pipelines
Phone
03 9816 2400
Mobile
0417 628 712
Address
Australia
Areas serviced

Michels Asia Pacific is part of Michels Corporation, a leading energy and infrastructure contractor headquartered in Wisconsin, US. With more than 8,000 employees and 17,000 pieces of major equipment, Michels is one of the largest and most diversified utility contractors in the world. Based in Wangaratta, Victoria, Michel Asia Pacific is involved in various areas of utility construction, including pipeline construction, directional crossings, foundations, communications and pipe services, and tunneling, specialising in horizontal directional drilling.

Contact name
Bryce Morrow
Contact position
General Manager
Phone
03 5723 5473
Mobile
0438 319 801
Address
Australia

Momentum Engineering is an independent, Australian owned and operated company that is quality assured and provides safe, efficient and fit-for-purpose engineering consulting and project management services to the energy and resource sector.

Momentum has a proven track record in the pipeline industry, with projects across Australia, including pipelines and laterals; offtake, metering, conditioning and delivery facilities; gas compression and liquid pumping stations; gas storage developments; and gas and liquid production, treatment and export plants.

Momentum provides a range of engineering, procurement, construction and management services to the industry, including concept studies and front-end engineering and design, detailed engineering and design, procurement and construction management, and commissioning and close-out support activities.

Momentum is committed to providing practical solutions to its clients without compromising safety and quality. Momentum is a proud supporter of APGA through the sponsorship of events, involvement in the YPF Committee and APGA Research and Standards Committee membership.

Contact name
Chris Clayton
Contact position
Business Development Manager
Phone
08 9321 6566
Address
Australia
Areas serviced

Oceaneering Australia has more than 50 years' experience in providing engineering, inspection, QA/QC services, fabric maintenance and integrity services throughout Australia, servicing industries such as oil and gas, mining, refining, infrastructure and renewables.

The company has multiple sites across Australia and has a proud history of providing safe, cost-effective and high-quality services to its valued clients both onshore and offshore.

Contact name
Roy Andrich
Contact position
General Manager
Phone
(08) 6499 0000
Mobile
0417 925 572
Address
Australia
Areas serviced

Peter Norman Personnel's (PNP) 30 plus years of national success has been built on finding, placing and managing great people to ensure successful outcomes for organisations of all sizes.

Founded by a pipeliner, PNP is a national contractor, permanent recruitment and payroll management agency committed to servicing the pipeline industry.

When it comes to pipeline personnel, PNP's team are at your service to professionally and compliantly ensure that employment engagement, OHS, payroll and statutory obligations are met anywhere in Australia.

With great people working with and for PNP, whether you've found them or need the company to find them for you, PNP is the key to personnel and your success.

Contact name
Kate Cuic
Contact position
Business Manager
Phone
1300 843 539
Areas serviced
Company name

A hard-working NATA-accredited pipeline testing firm based in Brisbane, Qld, Pipe Tek offers full-service pipeline integrity and maintenance turnkey solutions across NDT, pre-cleaning, gauging, filling, hydrostatic and pneumatic testing, dewatering, drying with either desiccant or refrigerant dryers, nitrogen purging, caliper pigging, and inline inspection (ILI) with dig ups and verification by phase array.

PIPE TEK is the exclusive representative of Enduro Pipeline Services for Australia, New Zealand, Papua New Guinea and Asia.  It uses the most durable and reliable ILI tools in the industry including supplying of all types of cleaning pigs.

Pipe Tek has a range of MFL, caliper and cleaning tools based on the east coast of Australia that can be calibrated and rebuilt to be used for future jobs. Pipe Tek personnel are also fully trained to run Enduro’s tools and stay onsite to ensure continuity throughout, meaning overseas technicians aren’t required.

The team prides itself on utilising the most advanced technology available with equipment capable of sending data immediately via the mobile network or via satellite for remote locations.

Originally established in 1953 as Tank Calibrators Pty Ltd, now as Pipe Tek has extensive experience and a direct approach to safety.

Contact name
Myles Brannelly
Contact position
Managing Director
Phone
0417 707 729
Address
Australia
Areas serviced

Pipeline Engineering Consultants specialises in onshore buried pipeline and shore crossing design. PEC provides an integrated CAD and engineering design service for the oil, gas and water industry.

It has the in-house expertise and experience to develop documents and drawings from conceptual, front-end engineering design, detail design through to 'Approved for Construction' including verification of pipelines to AS 2885 and RPEQ sign-off.

The range of engineering and design services that it can provide includes pipeline design to AS 2885, ISO 13623, BS EN 14161, ASME B31.4 and B31.8, plant piping design to ASME B31.3 and PE pipe design to AS 2566.

PEC specialises in horizontal directional drilling (HDD) design and has been involved in over 100 HDD crossings in Australia, including 14 shore crossings.

The designs have been performed for operators, EPCI contractors and HDD installation contractors. The HDD designs include profile development, installation assessments, breakover analysis, hydraulic fracture assessment and pipeline integrity verification.

Contact name
Stephen Tan
Contact position
Principal Engineer
Phone
08 9307 9569
Mobile
0415 224 383
Address
Australia
Areas serviced

The ROSEN Group is a globally leading provider of cutting-edge solutions in all areas of the integrity process chain. The business is privately owned and employs a team of almost 4500 workers, operating in more than 120 countries.

“Empowered by Technology” is the promise that ROSEN systematically delivers on by enhancing the operations of its customers and making them safe, cost-effective and more efficient.

ROSEN offers the know-how and technology to ensure that customers comply with legal standards and safeguard people and environment, while gaining maximum profit from assets as diverse as pipelines, tanks, vessels, wind turbines, trains, and telecommunication towers.

ROSEN’s products and services:
- Inspection of critical industrial assets to ensure reliable operations of the highest standards and effectiveness.
- Customised engineering consultancy providing efficient asset integrity management.
- Engineering support as well as integrity assessment for H2 and Co2 projects.
- Production and supply of customised novel systems and products.
- Market-driven, topical state-of-the-art research and development providing “added value” products and services.

Contact name
Daniel Schneke
Contact position
Director Business Execution
Phone
0438 029 701
Mobile
0438 029 701
Address
Australia
Areas serviced
Company name

SPIE Plexal was established in 2002 as a brownfield’s specialist engineering company. Our core capabilities initially centered around instrument, electrical and control systems engineering and commissioning. Since being acquired by SPIE in 2013 we have expanded our capability to include maintenance engineering and instrument / electrical implementation and inspection services.

In addition to our Australian offices in Perth and Brisbane, SPIE have a global presence which can serve local, regional and worldwide needs for our specialist services. We have completed over 1,000 projects and continue to serve our Clients across projects in Australia, Africa, and the Middle East.

Contact name
Vic Di Camillo
Contact position
General Manager, Western Australia
Phone
08 9426 5700
Address
Australia

Sustech Engineering is a multidisciplinary engineering consultancy (ISO 9001:2015 certified) providing engineering and project management services since 2013 to WA’s key oil and gas, hydrogen, chemical, fertiliser, ammonia, pipelines, water, CCS, mining-mineral processing and port with an emphasis on safety and sustainability.

The company partners at any stage of small to medium greenfield, brownfield and shutdown engineering projects and take up roles of owner’s/lender’s engineer or feasibility concept-FEED-detail design engineer. We do regulatory compliance, readiness for operation, operation-maintenance, asset integrity and troubleshooting, technical due-diligence, 3rd party design & MDR review-validation as well as litigation support and pilot plants.

We also provide niche services like pipe stress analysis, pipelines, vessel, tank, FEA, FRP-piping, inspection, various studies and FFS, structural analysis, process safety, electrical system analysis. We think out of the box and provide cutting-edge solutions and in-depth analytics to process and projects.

Driven by a passion for forensic engineering, the company creates long-lasting value through experienced professional service and efficient risk management. Our ethos is what sets it apart and keeps it ahead of the competition: We put our clients first.

Contact name
Soumen Guha
Contact position
Managing Director
Phone
08 6161 8160
Mobile
0435 164 103
Address
Australia

If you have any issues completing this form, please contact Managing Editor Molly Hancock at molly.hancock@primecreative.com.au