Alltype Engineering provides piping, structural steel, skids, tank and vessel workshop fabrication services and multidiscipline site installation works across almost every industry in Australia. Some recent works include multidiscipline construction scopes and projects that include structural, mechanical piping, E&I works, turnkey construction and maintenance services. In partnership with pipeline contractors and civil contractors, Alltype delivers complete turnkey installation works and work with specialist engineering consultants for design and construct / EPC projects where requested by clients.
A specialist in the fabrication and installation of gas pipeline facilities (including MLVs, barred tees, launchers and receivers, filters, metering and pressure reduction skids), compressor stations and compressor package installation, gas processing equipment installation, pump stations and mild steel cement lined (MSCL) works, subsea spools and installation aids. Alltype is a WS1 Water Corporation approved panel member.
Remote and local site construction of gas compressor stations, offtake stations, meter stations and MLVs complement the company's fabrication capabilities to provide end to end single-source solutions to its clients or standalone construction services. Alltype has opened an office in Brisbane to expand offerings into the eastern states.
Alltype Engineering is a subsidiary of WestStar Industrial (ASX:WSI).
Please send all RFQs to tenders@alltypeengineering.com.au
Altrad is a leading energy, resources, and infrastructure services group, providing engineering, construction, commissioning, and maintenance services from conception to decommission, across the full asset lifecycle.
At Altrad, our vision is to be the most trusted specialist services group in the delivery of projects, operations, and maintenance services in the energy, water, and resources sectors.
Our guiding principle is clear – increase asset life and lower the total cost of ownership for clients by providing quality results that are delivered safely.
Altrad employs more than 3,000 project and support personnel, operating throughout Australia with facilities in Western Australia, Queensland, South Australia, New South Wales and the Northern Territory. From these facilities and various site locations, Altrad manages all areas of engineering, procurement, construction and maintenance of projects and service contracts.
Anti Corrosion Technology (ACT) is a specialist engineering company providing sustainable solutions in materials engineering and corrosion control for the oil and gas, water, mining, marine and power generation industries.
ACT is the only authorised distributor of STOPAQ systems in Australia and New Zealand and offers unique and cost-effective solutions for external pipeline corrosion protection including field joint coating, flange and valve protection, horizontal directional drilling, factory-applied mainline coating, steel pipe casings under road and rail crossings and marine piles/offshore risers and jacket legs, as well as the corrosion protection of various steel structures such as pipe supports, I-Beams, tank chimes, headstocks, blastwalls, transmission/telecommunication towers.
For more information about ACT’s products or services, please contact the Technical Product Specialist team.
Atlas Copco Rental is a market-leading provider of temporary air, nitrogen and steam solutions for industrial applications. For short or long-term demands, planned maintenance, business continuity or unexpected emergencies the company provides agile and cost-efficient solutions. Atlas Copco is not simply an equipment rental company but a provider of total solutions, delivering support from the beginning to end of your project. The company's comprehensive fleet of state-of-the-art equipment is tailored to match the needs of local industries. Safety is paramount, accessories are part of the total package and equipment is supplied to
comply with local regulations. Areas serviced include: Australia, New Zealand and Papua New Guinea.
The mission of Australasian Corrosion Consultants (ACC) is to maximise the service life of essential infrastructure by using the application of innovative corrosion design, enabling businesses to increase the life of their assets and reduce expenditure on maintenance.
The company’s services include:
Corrosion investigation and consulting
Asset integrity services
Cathodic protection design
Surveys and investigations
Installation and maintenance
Corrosion Control Engineering (CCE) is Australasia's leading pipeline corrosion prevention service provider. Formed in 2001, CCE has eight offices covering Australia, New Zealand and the Pacific Islands. This includes offices in Sydney, Melbourne, Brisbane, Perth, Adelaide and Townsville in Australia and in Auckland and New Plymouth in New Zealand.
Services include cathodic protection (CP) design, supply, installation, commissioning, investigation and maintenance on a variety of onshore and offshore pipeline systems. CCE is also Australasia's premier supplier of CP materials and pipeline equipment with fully stocked warehouses across the region, each staffed with product and materials specialists. CCE also offers pipeline integrity and coatings consultancy services.
Directhitt is an Australian trenchless specialist for oil and gas, mining, power, telecommunications, water and wastewater projects which require trenchless pipeline or conduit installations in onshore or shore crossing environments. Based on 27 years of contracting experience throughout Australia and Asia, the company offers complete HDD design and engineering solutions for clients, from concept to construction, through the application of its specialised knowledge and experience, including:
Design and engineering
River Crossings
Shore crossings
Hard rock difficult geotechnical conditions
Microtunnelling
Directhitt is experienced with diameters of 100 to 1,200 mm, across distances of up to 2,100 m. The company can provide clients advice on project methodology, such as the use of HDD intersects for long crossings or where geotechnical conditions require careful management of drilling pressures and drilling fluids for environmentally sensitive locations.
The contactor can also provide clients advice on geotechnical investigations required to minimise project risk and deliver a successful project, avoiding potential contractor construction claims.
Fast Fusion manufactures and sells equipment which leverages patented technologies for pipe loading and portable weld cooling of polyethylene (PE) pipe fusions. Fast Fusion's innovations bring improved personnel safety, protection from environment allowing continuation of work in harsh conditions, weld reliability improvements and increased production per hour resulting in significantly lower costs per fusion weld.
Ferret Industries (FPK) has been supplying the hose, tube and pipe industries with open cell polyurethane cleaning/drying PolyFerrets® since its inception back in 1993.
FPK manufactures and supplies sizes from 5mm to 1.8m in diameter in Virginia, Queensland.
In the smaller sizes 5mm to 120mm diameter, the company use foam densities from 42kg to 120kg M3 depending on the application and can supply a pneumatic (Australian made) hand held launcher for shooting the PolyFerrets® down the lines of 5mm to 50mm id.
For the larger lines (gas, water, fuel), FPK supplies light density white PolyFerrets® 15kg M3, low density green PolyFerrets® 27kg M3, and medium density pink PolyFerrets® 42kg M3.
Its PolyFerrets® can be made to any size to suit a particular pipe diameter, be it steel or HDPE lines
FPK can make them plain, with bevel tips and sealed bases, pull rope and washers, abrasive scourer coating, and even tracker cavities on large sizes.
The company works with its clients to find the best size and type of PolyFerrets® to suit their projects - whether its cleaning or drying or post-hydrostatic testing.
Being made here in Australia means it can offer very quick lead times for the largest projects.
GF Piping Systems is one of the three divisions within Georg Fischer Corporation and is a leading provider of plastic and metal piping systems with global market presence.
In Australia, GF Piping Systems is dedicated to the manufacture, supply and marketing of plastic piping systems for the safe and secure conveyance of liquids and gases. It is located where clients need it, with a local network sales offices and warehouses across Australia.
The product portfolio includes pipes, fittings, valves and the corresponding automation and jointing technology for industry, building technology as well as water and gas utilities.
With its intelligent complete systems, trendsetting products and technologies, GF Piping Systems is setting global standards in quality and performance.
In project planning and implementation, GF Piping Systems convinces by application orientation and by responding to individual customer needs.
Global Engineering & Construction is a leading provider of pipelines and facilities construction in the oil, gas and energy sectors.
We specialise in remote and challenging projects, delivering every aspect of a project – from design and fabrication, installation, and commissioning through to ongoing maintenance and repair.
Supported by our in-house hydrotesting and ILI crews, we tackle projects from small dig-ups and repairs, well head connections and flow lines, facilities installation, and commissioning, all the way to main line connections, lateral pipelines and end of line facilities.
100 per cent Australian owned with offices in Brisbane and Kingaroy, we are able to deliver your projects across Australia, supported from our bases in the Cooper Basin and Surat Basin regions.
HH Civil is a leading engineering and construction delivery partner within the pipeline and facilities industry, underpinned by a culture of safety, collaboration and innovation. HH Civil ensures its clients have the highest level of confidence while the team delivers their project – from concept through to completion and into operation.
With its core values of understanding and commitment, HH Civil has a strong reputation for successfully and safely delivering steel and HDPE pipeline and facility solutions for gas, sewer and water, as well as a broad portfolio of other mechanical and civil infrastructure projects on time and on budget.
HH Civil’s effective execution of field-proven, multifaceted and comprehensive construction capabilities span the following services:
- structural, mechanical, and piping fabrication and mobile site works
- electrical and cathodic protection works
- civil and bulk earthworks
- pipeline and facility construction
- pipeline integrity and maintenance
- specialist equipment hires
HH Civil is also proudly a joint venture partner of Indigenous construction company, PACH Group Pty Ltd. Operating nationally, PACH Group delivers pipelines and facilities across the mining, civil, earthworks, utilities, and renewables sectors.
iPipe Services is a leading independent provider of specialist pipeline services to the oil, gas, mining and utility industries, wholly owned by Monadelphous Engineering. The company provides a comprehensive range of services including maintenance, construction, and process and pipeline services across steel transmission pipelines, compression facilities and gathering networks for the upstream CSG industry.
Being at the forefront of new technologies, iPipe Services' investment into research and development as well as continuous improvement with innovative solutions, allows the company to deliver safe and more efficient results for its clients.
iPipe Services' commitment to its clients is to provide the highest quality independent specialist pipeline services available in the marketplace. The company delivers on this commitment through honesty in communication, dedication to quality, safety, sustainable work practices and innovation.
The company's skilled workforce is focused on its clients’ specific needs. iPipe Services does this by working closely with its clients, suppliers and stakeholders to provide turn-key, efficient and cost-effective solutions for project delivery.
With more than 80 years' experience, Iplex has an excellent understanding of the challenges the water industry faces. Its team actively works and collaborates with customers and industry to provide safe, secure and innovative water solutions today and into the future.
Iplex has broad and proven capabilities and is driven by what is important to it: its communities and customers, and providing strong and effective pipeline products and solutions to water authorities, rural and urban agriculture, civil and mining infrastructure markets.
JLL Infrastructure Advisory (JLL) is a specialist land access, land management and valuation company with particular expertise in the acquisition of land and easements for major linear infrastructure projects including water, gas and slurry pipelines.
With more than 48 years' experience across Australia working in this specialist field, JLL remains the first choice for infrastructure developers where the timely delivery of projects in a cost-effective manner is paramount.
JLL delivers its core services on a national scale with offices throughout Australia specialising in land access negotiations, landholder, stakeholder and community engagement, land and easement acquisition, route and site selection, preparation of statutory documentation and agreements, para-legal advice and assessments of compensation/valuations.
The Land Access & Management Team (LAMS) team brings long-term and wide-ranging experience to a broad range of projects throughout Australia.
The company team has been personally selected to undertake complete land project management from concept to completion. LAMS services and areas of expertise include route/site selection, title information, easement negotiation and acquisition, survey, database establishment and management, environmental and CH studies, community consultation, valuation, landowner negotiation, all related documentation and dispute resolution.
The LAMS ‘hands-on’ management structure ensures a significant cost benefit to all project proponents who then benefit from an assured best outcome for all projects.
Maxibor is Australia’s leading provider of horizontal directional drilling (HDD) design and installation services across the gas, rail, water, sewer, road, power, mining, renewables and telecommunications sectors. It has the largest fleet of HDD machinery in Australia with 10 HDD rigs, including two maxi-rigs capable of long-distance (1.5 km) bores at a diameter of up to 1,200 mm. Maxibor has multiple crews that are very experienced in all ground conditions including hard rock and water-charged sand.
Its professional trenchless technology design and engineering services encompass bore alignment plans and profiles, drilling fluid fracture gradient analysis, mechanical analysis of drilling operations and RPEQ certification of the HDD bore design and product pipe installed loads.
The company's crews and equipment can be easily mobilised to anywhere in Australia from its bases in New South Wales and Queensland. David Turner and the senior team are readily available to discuss how Maxibor can collaborate with clients to optimise outcomes on their gas pipeline installation projects.
McConnell Dowell is a leading international pipeline contractor. It has constructed more than 30,000 km of new pipe networks across more than 200 projects including gas, petroleum, water and slurry pipelines. These pipelines help drive economic and social progress across Australia, New Zealand and Asia.
McConnell Dowell is the partner of choice for complex EPC and construction projects. The company is an expert in large diameter pipeline construction and has delivered gas pipelines up to 1,300 mm in diameter and water pipelines up to 1,800 mm in diameter. Its in-house specialist skills and plant enable execution of Direct Pipe method, horizontal directional drilling, microtunnelling, marine pipe pulls, pipe bridges and other complex crossing solutions.
McConnell Dowell's sustained success in the pipeline industry is based on strong client collaboration and effective community consultation and environmental management.
Michels Asia Pacific is part of Michels Corporation, a leading energy and infrastructure contractor headquartered in Wisconsin, US. With more than 8,000 employees and 17,000 pieces of major equipment, Michels is one of the largest and most diversified utility contractors in the world. Based in Wangaratta, Victoria, Michel Asia Pacific is involved in various areas of utility construction, including pipeline construction, directional crossings, foundations, communications and pipe services, and tunneling, specialising in horizontal directional drilling.
Mitchell Water (Mitchell) is one of Australia's largest dedicated energy and water infrastructure contractors, having laid more than 17,000 km of pipelines throughout Australia.
Capabilities include design and construction of:
- CSG gathering, water, gas and slurry pipeline and pumping systems
- large and small diameter mild steel, carbon steel ductile iron, PVC, GRP and poly pipe
- Bullet Plow vibratory plough trenchless technology for poly up to 315 mm
- CSG upstream water and gas gathering systems
- high-density polyethylene (HDPE) welding trailers
- stock and domestic water supply schemes
- bulk water transmission pipelines, pump stations, earthen storage and tank construction
- GPS machine controlled trenchers
- ISO 9001 Quality, ISO 14001 Environment, AS NZ 4801 OHS and Federal Safety Accreditation.
Mitchell has developed a reputation for its design and construct capability; fast-tracked construction credentials; and exceptional engineering, safety, cultural heritage and environmental management standards.
The senior team at Mitchell includes Managing Director Wayne Mitchell, General Manager Rob Shelton, Engineering and Design Manager Lee Briggs and Business Development Manager Ross Bennett.
Moody Civil & Pipe provides services including:
- civil engineering and pipeline construction
- mechanical work
- project design and construct
- maintenance and emergency works.
MPC Kinetic is built on the premise of ensuring its clients have the highest level of confidence while its team delivers their project – from concept through to completion.
The company achieves this through effective execution of field-proven, multifaceted construction capabilities that ensure large-scale resource developments are realised and by innovating long-term, highly efficient operation and maintenance solutions. And it’s a successful formula.
MPC Kinetic continues to play key roles in Australia’s largest resource developments and as a result has forged strong, long-term working relationships with most of our country’s leading resource sector companies. The company’s breadth of expertise across the oil and gas, mining, renewable and water sectors is underpinned by two things – understanding and commitment.
MPC Kinetic can deliver positive project outcomes for its clients because it has a strong understanding of development and operational challenges, backing this up with a determined pursuit of innovative solutions that deliver maximum benefit.
Our trusted team is Building Energy Infrastructure for a Better Future, unlocking world-class projects and powering communities. We have perfected our craft for 40 years navigating the most challenging urban, rural, and remote terrain across Australia, Papua New Guinea, and Southeast Asia.
Nacap is a premier engineering, procurement, and construction contractor. Although our expertise shines in major pipeline construction, our primary focus is fostering lasting partnerships. We pride ourselves on:
• Early-stage contractor involvement. Our expert team works in collaboration with you to optimise design-program-cost, and de-risk project, sets a positive tone and works with you to agree on a plan both parties are satisfied with and are excited to deliver; and
• Best practice turnkey solutions. Nacap takes the stress out of the project and thoughtfully solves problems ahead of time.
• We understand building strong, ethical partnerships includes our partnership with local communities, First Nation People, and planet Earth.
With a flawless safety record, our extensive portfolio covers various sectors, including oil and gas, power, defence, renewables, mining, and water. Our wide range of services encompasses:
• Brownfield refinery works. Major pipeline construction (oil and gas, water, slurry, and infield gathering infrastructure)
• Construction and commissioning of processing facilities, above ground and buried.
• Infield gathering and wellhead connections
• Remote works specialist and accommodation strategy (Camp establishment)
• Aviation Fuel tanks and fuel system
• Wind Farm and BESS Civil Balance of Plant
• Overhead powerlines
Nacap is part of the global Quanta family, delivering you the Quanta advantage. With a 2022 revenue of more than US$17 billion, Quanta unites more than 200 operating companies to tackle the most complex infrastructure challenges in the world. Nacap works with our Quanta family to marshal global resources seamlessly and efficiently in the local interest of our customers.
National Australian Pipelines is an Australian owned company operating out of Melbourne with more than 30 years' experience in the construction of gas, oil and water pipelines, as well as civil construction. The company offers specialised solutions in trenching and pipelaying, trenchless construction, river and bridge crossings, pump stations and dams.
National Australian Pipelines has experience in a wide variety of pipeline materials from small to large diameters (50 to 2,000 mm) including carbon steel, mild steel, ductile iron, PVC, GRP, HOBAS and HDPE pipe. It has a proven track record in occupational health and safety, cultural heritage, quality assurance systems and environmental management.
The company's pipeline construction crews include experienced plant operators, specialist pipelayers, welders and field service mechanics who are trained in OH&S induction, confined spaces, traffic management, first aid, electrical spotters and rail safety training and awareness. National Australian Pipelines is a recognised leader in pipeline construction – constructing pipelines safely, on time and within budget for clients who require the very best.
Oceaneering Australia has more than 50 years' experience in providing engineering, inspection, QA/QC services, fabric maintenance and integrity services throughout Australia, servicing industries such as oil and gas, mining, refining, infrastructure and renewables.
The company has multiple sites across Australia and has a proud history of providing safe, cost-effective and high-quality services to its valued clients both onshore and offshore.
Peter Norman Personnel's (PNP) 30 plus years of national success has been built on finding, placing and managing great people to ensure successful outcomes for organisations of all sizes.
Founded by a pipeliner, PNP is a national contractor, permanent recruitment and payroll management agency committed to servicing the pipeline industry.
When it comes to pipeline personnel, PNP's team are at your service to professionally and compliantly ensure that employment engagement, OHS, payroll and statutory obligations are met anywhere in Australia.
With great people working with and for PNP, whether you've found them or need the company to find them for you, PNP is the key to personnel and your success.
A hard-working NATA-accredited pipeline testing firm based in Brisbane, Qld, Pipe Tek offers full-service pipeline integrity and maintenance turnkey solutions across NDT, pre-cleaning, gauging, filling, hydrostatic and pneumatic testing, dewatering, drying with either desiccant or refrigerant dryers, nitrogen purging, caliper pigging, and inline inspection (ILI) with dig ups and verification by phase array.
PIPE TEK is the exclusive representative of Enduro Pipeline Services for Australia, New Zealand, Papua New Guinea and Asia. It uses the most durable and reliable ILI tools in the industry including supplying of all types of cleaning pigs.
Pipe Tek has a range of MFL, caliper and cleaning tools based on the east coast of Australia that can be calibrated and rebuilt to be used for future jobs. Pipe Tek personnel are also fully trained to run Enduro’s tools and stay onsite to ensure continuity throughout, meaning overseas technicians aren’t required.
The team prides itself on utilising the most advanced technology available with equipment capable of sending data immediately via the mobile network or via satellite for remote locations.
Originally established in 1953 as Tank Calibrators Pty Ltd, now as Pipe Tek has extensive experience and a direct approach to safety.
Pipecraft is a Western Australia-based specialist pipeline construction contractor servicing Australia and Papua New Guinea.
Pipecraft provides a range of project management, engineering, construction, maintenance, mechanical and equipment hire services to the upstream, midstream and downstream resource, utility and energy markets.
Pipeline Engineering Consultants specialises in onshore buried pipeline and shore crossing design. PEC provides an integrated CAD and engineering design service for the oil, gas and water industry.
It has the in-house expertise and experience to develop documents and drawings from conceptual, front-end engineering design, detail design through to 'Approved for Construction' including verification of pipelines to AS 2885 and RPEQ sign-off.
The range of engineering and design services that it can provide includes pipeline design to AS 2885, ISO 13623, BS EN 14161, ASME B31.4 and B31.8, plant piping design to ASME B31.3 and PE pipe design to AS 2566.
PEC specialises in horizontal directional drilling (HDD) design and has been involved in over 100 HDD crossings in Australia, including 14 shore crossings.
The designs have been performed for operators, EPCI contractors and HDD installation contractors. The HDD designs include profile development, installation assessments, breakover analysis, hydraulic fracture assessment and pipeline integrity verification.
Pipeline Supplies Australia (PSA) is a leading provider of pipeline solutions for a wide range of industries. With extensive experience in this field, the company offers a comprehensive range of pipeline products and services, including:
Pipe - Black Steel ERW, Seamless, FBE, Trilaminate, Galvanised and Stainless Pipe;
Fittings - Butt Weld, Black Steel, Victaulic, Flanges;
Valves - Butterfly, Strainers, Vibration Eliminators, Check Valves;
Pump Sets - Victaulic & Custom Fabrication Solutions.
PSA's extensive inventory of products and materials allows the company to provide prompt delivery and installation services to customers across Australia. Backed by the Reece Group, PSA is equipped to handle pipeline projects of any size and complexity, from small scale installation to large scale industrial projects.
With a commitment to quality, safety, and customer satisfaction, PSA is the go-to source for all your pipeline needs.